| AMI UEF210-31TC Flange Block Bearings | A2:171.45 mm; J1:50.8 mm; N1:15.875 mm; Da:120 mm; Initial grease fill:136.08 g; P180°:14.2 kN; Cap bolt:2 x 1/2-13 UNC; Stabilizing ring:2 x SR-1611; Pa:4.8 kN; J max.:241.3 mm; |
| AMI UCNST210-31 Take Up Unit Bearings | D:1850 mm; Da max.:1803 mm; d1 ≈:1495 mm; E:1737 mm; da min.:1362 mm; Mass bearing:3550 kg; Reference speed:190 r/min; s max.:41.9 mm; Basic dynamic load rating C:21600 kN; Limiting speed:240 r/min; |
| AMI CUCF215-48CE Flange Block Bearings | Accessories:Two Seals; d:30.000 mm; Oil Speed Rating n2:9500 rpm; D:62.0000 mm; Basic Static Radial Load Rating Co:28000 N; Grease Speed Rating n1:7000 rpm; B:27.00 mm; Basic Dynamic Radial Load Rating C:30300 N; Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm; |
| AMI UEFT209-27NP Flange Block Bearings | P120°:73.8 kN; Cap bolt, SAE grade:8; A1:133.35 mm; J max.:406.4 mm; da:96.838 mm; A2:273.05 mm; RG:1/2 NPT; End plug (suffix Y):EPR 13; Ca:89.789 mm; Taconite seal:TER 107; |
| AMI UCP205-16CE Pillow Block Bearings | with tapered bore:1 700 min-1; with cylindrical bore:1 400 min-1; Grease:803 kN; d:120 mm; Oil:83.890 kN; rs (min):2.1 mm; Dynamic (Cr):4.5 mm; D:215 mm; B:76 mm; Static (Cor):8.3 mm; |
| AMI UCF210 Flange Block Bearings | d:180 mm; with cylindrical bore:940 min-1; B:96 mm; D:300 mm; Dynamic (Cr):6 mm; Grease:1540 kN; rs (min):3 mm; with tapered bore:1 200 min-1; Pu:957 kN; Static (Cor):11.1 mm; |
| AMI UCHPL202-10MZ20RFB Hanger Unit Bearings | r1s (min):2.5 mm; C:30 mm; r2s (min):1 mm; a:30 mm; B:35 mm; D:150 mm; rs (min):3 mm; T:38 mm; Static (Coa):251 kN; Dynamic (Ca):211 kN; |
| AMI UCST205-15TC Mounted Units & Inserts | A1:98.425 mm; P180°:49.8 kN; da:79.375 mm; P150°:40.5 kN; H2:41.275 mm; Initial grease fill:286.33 g; ba:34.925 mm; J min.:260.35 mm; L:349.25 mm; Cap bolt, SAE grade:5; |
| AMI MBNFL5-16CW Flange Block Bearings | rs:1 mm; Oil:18 000 min-1; d:20 mm; D:47 mm; B:20.6 mm; da:25 min; Grease:15 000 min-1; Da:42 max; Dynamic (Cr):12.774 kN; Pu:0.298 kN; |
| AMI UCST211-34TC Mounted Units & Inserts | d3:180 mm; d1:133.35 mm; Locking device:MBL 30; Hydraulic nut:HMV 30 E; B1:139 mm; B4:26 mm; Mass adapter sleeve assembly:6.15 kg; G:M 150x2; d:150 mm; B:24 mm; |